Quick Search  

Advanced Search
  Browse Equipment  
Affiliate Listings
  Login  
Text Translation
Current Category: Main > Waste & Recycling
Incinerator (0)
 Other Waste & Recycling Equipment (2)
Balers(9)
Compactors(4)
Front End Bins(2)
Lugger Bins(0)
Rear Load Bins(0)
Recycling Equipment (6)
Roll - off Bins(8)
Self - Contained Units(0)
Shears(9)
Shredders(2)
Featured Classifieds in Waste & Recycling [ browse by text ] [ browse by pic ]
Photo Title  Description City Price Entry date
Compactor for small cars and white goods new compactor for white goods Made in China .Will compact small cars with a 8x 14 foot charge box call for pricing Grimsby - May 19-7:08
ALLIGATOR SHEARS Our shears were designed to meet three requirements: durability, productivity and safety. Each shear isdesigned with standard American components so that service and ease of spare parts can be obtained anywhere in the world. Each model comes with a variety of options including: left/right hand feed, single/three phase, gas powered, larger cylinders for increased cutting force allowing our shears to be designed to meet each customer’s needs. Simplicity is our goal for the alligator shear. The hydraulic system is designed for easy service and repair. NO SPRINGS, STEEL CABLES, OR LOG SPLITTER VALVES. LESS PARTS = LESS MAINTENANCE. The hydraulic system is electrically operated. Grimsby - Jun 22-8:42
DOWNSTROKE BALERS MODEL # RB120 The RB-120 downstroke baler is matched by no other. This unit weighs approx. 12,000 lbs. The frame is built to with stand the heaviest of forces. The RB-120 comes with a ten (10") bore cylinder. This allows the platen to deliver a full 235,000 lbs. of force. The frame work is manufactured from 6" x 6" square tubing. The RB-120 is designed for all nonferrous materials. With cylinders larger than industry standards, operating at 3000 PSI, and having one of the heaviest frames, this machine produces a heavier bale than the average downstroke baler. With a chain bale discharge, extracting the bale from the chamber is done with ease. Each bale comes with five wire ties, so losing a bale will never happen. An optional feed conveyor mounted in the back of the unit allows for operator convenience. Conveyor dimensions vary with application. The operator can feed from the front, rear, or both. An extra large door opening allows faster feed and thus higher production levels. SPECIFICATIONS: PLATEN FORCE:235,000 LBS CYLINDER:10" BORE / 7.5" ROD HP:20 HP TIES:5 CYCLE TIME:78 SECONDS SYSTEM PRESSURE:3000 PSI BALE:60" x 36" x 48" DOOR:RIGHT OR LEFT HINGE MACHINE WEIGHT:12000 LBS OPTIONS:RS-120 RF REAR FEED DIMENSIONS:60" x 48" x 13' Grimsby - Aug 5-14:06
SCRAP CHOPPERS Scrap Choppers Turn linear scrap into profit, reduce OSHA claims, improve safety, improve warehouse hygiene, reduce tipping fees, and reduce waste volume. Turn hard to manage material into clean, profitable product to sell. Upgrade the value of existing product or dispose of warehouse scrap with a Scrap Chopper. Our Scrap Choppers are capable of processing anything linear: wire & cable, banding, tube, pipe, scarf, baling wire and ACSR cable. Our machines can be customized to your specifications with options including: variable speed drive, stand configurations, lubrication systems and discharge conveyors. INDUSTRIES SERVED: •CABLE •PULP and PAPER •PACKAGING •TUBE and PIPE •RECYCLING •LUMBER BENEFITS: •WASTE TO PROFIT •REDUCE OSHA CLAIMS •IMPROVE WAREHOUSE HYGIENE •REDUCE TIPPING FEES WASTE MATERIAL: •PLASTIC and STEEL BANDING •BALING WIRE •TUBING •SCARF •SLITTER SCRAP •CABLE •ACSR CABLE Grimsby - Jun 22-8:42
DOWNSTROKE BALERS Meeting the needs of the nonferrous recycler Finally, a baler meant to last! No side or back bowing, more compaction power and more steel in the frame. Each unit weighs approximately 30% more than our competitors. Provides more weight in the frame to avoid any distortion. With an enlarged cylinder, these balers can operate at 3000 PSI, providing more compaction -power. Each unit is designed to provide the heaviest bale in the -safest manner. Each machine is designed with production and safety in mind to compact your nonferrous products. OPTIONS: •Rear load •Right/left door •Conveyor feed Grimsby - May 31-20:05

Newest Classifieds in Waste & Recycling
Photo Title  Description City Price Entry date
PORTABLE CATALYTIC CONVERTER CHOPPER Calalytic Converter Metal Shears This HRS - 932 allows thanks to its rechargeable battery system, to be portable on the site, .Its 10 tonnes of pressure is more than you will need, its blades cut all type of catalytic converters, as well as tubes and bodywork The case is composed of: - 1 rechargeable hydraulic foundation - 1 head cuts removable - 1 battery 18V 3Ah - 4 h batterylife - 1 metrer of cable - 1 loader 220V (additional battery if required) Weight 10.6 Kgs (23.3 lbs) approx Dimernsions 688 x 111 x 270 mm Force of Cup 440 KN Opening : 100 mm (10 cm or 4") Grimsby - Apr 22-12:56
VALPAK BIN GW COMPACTOR - DISTRIBUTORS WANTED INTRODUCING THE VALPAK BIN !!!! GENERAL WASTE COMPACTOR. THIS MACHINE LITERALLY SHREDS WASTE AND PACKS IT INTO 1000 l PLASTIC CONTAINERS. THIS MACHINE WILL CAN SAVE YOU SIGNIFICANT DOLLARS DUE TO THE FACT THAT ITS COMPACTION RATE IS SO HIGH THAT YOU REQUIRE LESS PICK UPS. Equipment Video: http://www.youtube.com/watch?v=llha_44SEys Grimsby - Aug 31-10:16
Colmar 3210 Colmar baler Model 3210 MFG 2002 Great for cans white goods powered by a Perkins motor Mobil fits on A tri Axle truck . 24 ft long . has a remote control operates with one man Load with a bobcat . Grapple , loader 60 sec cycle Grimsby $ 110,000.00 CAN Aug 21-7:27
Copper choppiing line and screening System Chopper and screening and blowing system. |for chopping copper Cable,will do car harness, House wire. Skid mounted Eldon 1200 Rasper 1997 Mfg 125 hp 440 volts,48 in.rotor 15 -fly knives 3 Stationary Knives with 3/8 conyvor 16 ft long 30 inch 1 hp 2 hoding hoppers 8 ft long and 4 ft wide with power discharge 6 in s/s conyvor to a 50 hp Eldon with a cross cut blade system and a 30 hp blower with a bag house, Baghouse has 6 24 ich bags Grimsby $ 135,000.00 CAN Aug 21-7:21
FRONT END CANS - 6 YARD 6 YARD FRONT END STACKABLE CANS, IN GOOD SHAPE READY TO GO TO WORK Grimsby - Aug 21-7:21
Auto-Tie Baler Large mouth Large mouth baler Total rebuild New wiring ,PLC , Switches,Hoses, liners. Full auto cycle ,and manual .. ready to go to work . opening 72 x 48 Bales 40x 48 x 60 xor 72 Can be seen working Great for Occ/ news/ plastic bottles Grimsby $ 65,000.00 CAN Aug 21-7:20
ALLIGATOR SHEARS MODEL R-26HD The R-26 HD is the largest of our faily of shears. Weighing approximately 6500 lbs. with an 8" OD cylinder, there is little this animal cannot cut. Providing over 300 tons of cutting force, heavy bar stock, channel, large pipe and pieces of rail car are no problem. Standard with a hydraulic hold down and safety cage, processing heavy steel becomes light work. Grimsby - Aug 21-7:19
ALLIGATOR SHEARS MODEL R-26 The R-26 Alligator Shears are specifically designed to make short work of extrusions, radiators and catalytic converters. They provide long blade length for a big bite without forcing you to pay for a lot of extra tonnage, horse power, and pumps commonly found in most long-bladed machines. WHY PAY FOR EXTRA TONNAGE WHEN CUTTING SOFT MATERIALS LIKE ALUMINUM EXTRUSION OR RADIATORS? These units provide high production of non-ferrous material at a reasonable price. Operating with safety in mind, stepping on the foot pedal activates the cut and releasing the foot pedal opens the shear for safety. BLADE LENGTH:26" CAPACITY:1 3/4" OD CUTTING EDGE:110 TONS CYCLE TIME:6 SECONDS OPENING:15" HP:7.5 HP WEIGHT:3400 LBS Grimsby - Aug 21-7:18
ALLIGATOR SHEARS MODEL R-18/R-22 The R-18 and R-22 Alligator Shears are designed for production work. Blade lengths and ample mouth opening allow for high production. These benefits make the R-18 & R-22 models very popular. The hydraulic system is designed for safety. By stepping on the foot pedal the operator activates cutting and by releasing the pedal opens the shear for safety. BLADE LENGTH:18" / 22" CAPACITY:2" OD / 2.25" or 2.5" OD CUTTING EDGE:115 TONS / 130 TONS CYCLE TIME:6 SECONDS / 7 SECONDS OPENING:11" / 13" HP:10 HP / 10 HP or 15 HP WEIGHT:3000 LBS / 3300 LBS Grimsby - Aug 21-7:18
ALLIGATOR SHEARS MODEL R-14 The R-14 Alligator Shear makes an exceptional cleaning shear with heavy tonnage. This model has short blades for precision work and the force needed to cut tough materials such as brass, nickel and stainless steel. With safety in mind, every shear is designed to cut when stepping on the foot pedal and opening up when the foot pedal is released. The R-14 has standard hydraulic and electrical components on every shear so that parts and service can be obtained anywhere in the world. Down time is not a concern! BLADE LENGTH:14" CAPACITY:2" CUTTING EDGE:105 TONS CYCLE TIME:6 SECONDS OPENING:9.5" HP:7.5 HP WEIGHT:2950 LBS Grimsby - Aug 21-7:17
page 1 of 5
more results > 1 2 3 4 5